Downloading BitTorrent Files| What is BitTorrent in Plain English?

 Downloading BitTorrent Files

What is BitTorrent in Plain English?

BitTorrent is a program you download. It is similar to a peer-to-peer file sharing service. Basically it goes like this: You download the installer. You get the link to a file that ends in .torrent and enter that URL into your browser (preferably Internet Explorer). This opens the BitTorrent download window. It starts downloading the file, or episode that you wanted (eg. alias2x01.torrent). As it downloads, it uploads the parts that you have to other people so many people can get it at once. When you've finished downloading the file, you can leave the window open (don't press finish or close the window) and other people can still download from you. This is very much encouraged.

I'm new to all this. How do I download with BitTorrent???

First we need to download and install a BitTorrent client

Official client 3.3
CODE
http://www.bitconjurer.org/BitTorrent/index.html


Experimental client 3.2.1b-2
CODE
http://ei.kefro.st/projects/btclient


TheShad0w Experimental S-5.8.3
CODE
http://home.elp.rr.com/tur


Azureus 2.0.3.0
CODE
http://azureus.sourceforge.net/


burst! RC5d
CODE
http://krypt.dyndns.org:81/torrent/download.phtml
BT++ 0.5.4 alpha [code]http://btplusplus.sourceforge.net


Shareaza 1.8.9.22
CODE
http://www.shareaza.com


Nova Torrent 0.2.0
CODE
http://blackflaw.dyndns.org


SimpleBT 0.1.9
CODE
http://sourceforge.net/projects/simplebt


BitAnarch 1.0.5a
CODE
http://sourceforge.net/projects/bitanarch/


Personal Torrent Collector 0.8.2.2
CODE
http://ptc.sourceforge.net


Effusion 0.3.3 beta
CODE
http://www.azrael-uk.f2s.com/az/effusion


Snark 0.5 beta
CODE
http://www.klomp.org/snark


ByteTorrent 0.95
CODE
http://sourceforge.net/projects/bytetorrent/


ABC 2.5
CODE
http://pingpong-abc.sourceforge.net


Note:

If you?re client freezes during D/Ls, it?s a problem with you?re network card or modem, this happens when you connect to more peers than you?re card or modem can handle & windows shuts it down. There is a cure. Shad0ws Experimental client allows you to set how many incoming peers to allow.

All about BT:
CODE
http://www.dessent.net/btfaq/#now_what


How to D/L Torrent files

BitTorrent is not like other peer-to-peer applications (such as Winmx, Kazaa, Gnutella, etc.) in that it does not have its own \"universe.\" Put another way, BT lives on top of the Web, which means that all of the searching/listing of available files is done on the web. When you find a file you want to download, you click on it and the BitTorrent client program will run and ask you where to put it, and then start downloading. Or you save target as. Save the file somewhere then click on it when you?re ready to start the D/L.

It doesn't do anything it says:
Problem connecting to tracker - timeout exceeded
Problem connecting to tracker - HTTP Error 503: Connect failed
Problem connecting to tracker - [Error socket error] (10061, \" Connection refused\")
Problem connecting to tracker - (111, \'Connection refused\'

Generally just wait ... this normally means that the \'Tracker\' is maybe too busy. Leave your window open and it will try to connect every 2 minutes or so.

Note: BT dose resume downloads, just click the torrent file again when you are ready to resume the D/L and save it to same place as the original. All clients have an option for default D/L directory. I suggest setting this option.

My speed is always very slow!!!!!!!!!!

Speeds can be real slow if your one of the below, they all can bet set to allow BT in and out

#1 behind a firewall
#2 behind a router
#3 on a network
#4 Xps firewall is enabled

ports 6881 thru 6999 need to be open to get good speeds

If you need info on bit torrent and how to set it up with a firewall or router

CODE
http://knowbuddy.dyndns.org/torrent/btclientconfig.html


Get general info on how torrent works and how it uses ports

CODE
http://knowbuddy.dyndns.org/torrent/btclientconfig.html

http://www.dessent.net/btfaq/


Where do I get torrent files???

Suprnova mirrors are the best site?s, updated every 20 minutes.

CODE
http://www.suprnova.org


There are others you can use here is another one:
CODE
http://www.torrentbox.com


Places to find other torrent sites
CODE
http://torrentlinks.com/index.php?action=displaycat&catid=10
http://members.chello.nl/~p.wiersema/
http://home.quicknet.nl/qn/prive/romeria/bittorrentsites.htm


Torrent Search engine
CODE
http://novasearch.net/


Keeping up with the torrent network
CODE
http://www.digital-update.com/forums/attachment.php?s=&postid=163113
http://www.filesoup.com/phpBB2/index.php
http://www.lickmytaint.com/
http://suprnova.org/


PeerGuardian

What does PeerGuardian actually do?

PeerGuardian does two things to help P2P users. The first is the obvious one, it closes connections on certain IP addresses. The second is that it optionally logs all connections made to your computer. The reason for this is so that if you do use PeerGuardian but still get sent a legal threat, you can cross-reference the date/time of the alleged infringement with the log. This gives us a list of IPs, one of which will be the IP that's doing the busting. It's basically to help us identify which IPs are doing the busting and weren't known to PeerGuardian before. - Hope that makes sense.

Is PeerGuardian 100% Protection?

CERTAINLY NOT!!! - PeerGuardian relies on users sharing information to stay up to date. It IS contributory to protection and (I'm not trying to blow my own trumpet here!!) it seems to be the most up-to-date and open database of this nature on the internet (as far as I know). The more people who are using full-logging and report the relevant IPs when they get a C&D threat (see above paragraph), the more people we can save. ANONYMOUS P2P is the way ahead IMHO, PeerGuardian isn't 100% effective.. I've NEVER claimed that and never will and I look forward to the day that PG (not just the app, more.. the database and communication between p2p'ers on blocking IPs) becomes totally redundant. I'm just trying to help supply the next-best thing until we get to that stage.

I use PeerGuardian and have still been sent a legal threat.

What do I do?

First of all, stop sharing the file you got busted with. If you're worried, try sharing older/rarer files. If you share Bourne Identity, Terminator 3 and a load of Busta Rhymes mp3s after being busted, you'll be asking for trouble. Second thing to do, check the "full connection log" in PeerGuardian. (you did have it enabled didn't you?) - Work out the difference in timezones on the infringement warning and cross-reference it with the log. From this you should be able to identify a handful of IPs. Either post that list to the PG forums for one of our admins/moderators/members to investigate or investigate it yourself and post the p2p enemy IP to the on-line database. - There are plans to automate this whole process in the future.

CODE
http://www.peerguardian.net/


Well it isn't really much of a tutorial but I spent a lot of time on this so please help me out if it is wrong.

-=-Bullet-T00th-=-

Read more »

How To Change Thumbnail Size And Quality

If any of you out there like to use the thumbnail view, especially for browsing through photos and images, it can become a bit of a drain on your system. It is possible to lower the thumbnail size and quality by editing the following registry keys.

Open the registry and navigate to :

HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer

Create a new DWORD value called ThumbnailSize, and set the value between 32 and 256.

And/or create another DWORD value called ThumbnailQuality, and set the value between 50 and 100.

Key Details :

USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailSize
Data Type: REG_DWORD (DWORD Value)
Data Value: 32 - 256

USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailQuality
Data Type: REG_DWORD (DWORD Value)
Data Value: 50 - 100

Read more »

How to change the serial number used in Windows XP, Valid for XP Corporate

Step 1

Open Start/Run... and type the command:
regedit and click "OK" (or press ENTER).

Go to HKey_Local_Machine\Software\Microsoft\WindowsNT\Current Version\WPAEvents,
on the right double click on "oobetimer" and change at least one digit of this value to deactivate windows.

Click "OK" and close the Registry Editor.

Step 2

Open Start/Run... and type the command:
%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).

This will bring up the "Activate Windows" window.

Check the option for "Yes, I want to telephone a customer service representative to activate Windows" and click "Next"


Step 3

Then click "Change Product Key" (don't enter any information on that screen)


Step 4

Type in the new key and click "Update"


The activate Windows by phone window will reappear at this point, just close it by clicking the X in the upper right hand corner

Step 5

Reboot your system and Open Start/Run... and type the command:
%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).

If you see "Windows is already activated" then everything is OK.

Read more »

How To Change A Cmos Battery

First the safety rules

The inside of a computer is a bad place full of electricity and sharp edges.
On the electricity side always when working on you computer make sure that it’s still plugged in to the power socket and the power is turned off, this is to ensure that any static
From you is discharged through the earth. The inside of most computer cases are unfinished metal and has very sharp edges so be careful.

The first signs of a battery failing are:-

1) your clock starts running slowly
2) when you boot (start) your computer it has a problem finding your hardware (no hard drive, no cd rom)

To change the battery you need the following tools

1) a X-point screwdriver
2) an anti-static strap(optional)
3) a new battery (seems logical)

Then unplug all the cables from the back of the computer as you remove them make a note where they came from. (So when you finished you can put them back)

Move the computer somewhere where you can work on it with ease

Remove the cover by locating the screws around the outer edge (back) of the computer
Some computer cases only require you to remove 2 screws on one side then a panel can be removed allowing you access to the computers insides, others you must remove 6 screws and remove the whole case by sliding it to the rear and lifting it off.

Now make sure that you read the safety instructions about static.
Look inside you will see a round silver thing that looks about the size of a 10p piece (quarter). This is the battery itself, carefully lift the retaining clip and slide the battery out. That’s it removed now go to your local computer retailer, electrical retailer (Tandy/Radio shack) taking the old battery with you and get a new battery.

Back to your computer insert the new battery by lifting the clip and sliding the battery in.

Reinstall your case and plug all the cables back (you did remember to label them didn’t you)

Now for the fun part.

You will now need to go into you bios….

Right the bios is the god of your computer.

To access it, when your computer first starts you will see a black screen with white text.

If you look carefully you will see a line that says something like "press del for setup" or some other key (F2 or ESC or tab) this will take you to god's house where you can make lots of changes to the way your machine works.

It is also the place where you can make your nice computer in to a rather expensive door stop so be careful and don’t go playing with anything.

You will now be presented with a blue screen with a lot of options on it,
The one we want is load optimised/default settings.

Press the F10 key and type y the computer should now reboot.

If every thing went well then your computer will now be up and running.



Shizers way: Keep computer running. Lay it on it's side and remove side cover to expose MoBo. Take any thin object, "small screwdriver, knife point, wood shiskabob skewer. Pull back the battery retaining clip. Toss the old battery in the junk recepticle, unless you belong to greenpeace and want to save the earth. Install the new battery. No need to reset bios becasue the compter supplies voltage to the cmos while it is running. Reset or resync clock with internet. Done!

Read more »

HOW TO CAPTURE STREAMING MEDIA

HOW TO CAPTURE STREAMING MEDIA

many websites (http://ww.smashits.com) stream songs and videos
people believe they cannot be downloaded, quite why i dont know. they kinda think there is no file present to dwnld

once the file is located it can then be retrieved by nettransport
nettransport is able to dwnld any file whether ftp or rtsp etc

1. Download Project URL Snooper 1.02.01 from http://rain66.at.infoseek.co.jp/
2. Install URL Snooper (and WinPcap together)
3. Don't run URL Snooper when it is done installing
4. Restart computer
5. Open Project URL Snooper
6. Click on the General Options Tab
7. user posted image
8. Chose a network adapter
9. Now click on the search tab
10. Click Sniff Network
11. Go to a webpage and you should see some results in the results list
12. If nothing is appearing then chose another network adapter, until one works

13. Now you are ready to begin searching
14. Click the "Hide Non-Streaming URLs" option to hide all http:// references and only show URLs corresponding to streaming audio/video (rtsp, pnm, wma, etc.)
15. Then click Sniff Network
16. Your links should appear as you begin streaming your file
17. Select your desired stream user posted image
18. usually rm file user posted image
19. On the bottom there should be the link which you simply copy user posted image

20. Download nettransport from here ftp://down_transport:123@s1.5fox.com/NT2Setup_multi.EXE or
ftp://nettransport:nettransport@61.153.24...Setup_multi.EXE
http://lycos26486.l97.lycos.com.cn/download.htm

21. Install it
22. Click on new
23. Paste link

now you should be able to download any file
if u need ne help
jus ask
i think dialups may have problems

Read more »

How to bypass web filters

How to bypass web filters

There are several occasions where you will be at a public te How to bypass web filters
rminal, and require access to a particular website that is blocked for some reason or another. How to bypass these restrictions is a very common question, and will be covered here.

Lets pretend for a moment that the Internet is made up of 26 websites, A-Z. The web filter blocks your browser from accessing sites X-Z, but not sites A-W. Simply make the browser think you’re going to A-
W. There are a variety of ways to do this:


Proxy Servers:
This is a list of http proxies. These sites may not be up forever, so you may need to search for “free http proxy” or “public proxy servers” or other similar terms.

Proxy server lists:
• http://www.aliveproxy.com
• http://www.multiproxy.org
• http://www.publicproxyservers.com/index.html
• http://www.tehbox.com/proxy
• http://www.proxz.com
• http://www.proxy4free.com/index.html
• http://free-proxies.com

Now that you have a list of proxies, you would open IE (internet explorer) and click on Tools > Internet Options > Connections > LAN Settings > Advanced. Enter the address and port of one of the servers from the list in the proper area (http) and make sure the “use a proxy server for your LAN” option is selected. Remember to replace the proxy and port at your terminal to the original when you're done.

*Note: Some proxies listed may not work, and this method may decrease your surfing speed. By trying various entries, you’ll find one that works, or works faster.

The infamous translation trick:
Go to a web page translation site and use their services to “translate a page to English” thus accessing the blocked page through their trusted site.

You’ll notice that several translation sites are blocked, but by using less popular ones, this method can still be effective. Here is a list of some translation services. Again, these sites may not be up forever, so you may need to search for them.

• http://babelfish.altavista.com
• http://world.altavista.com
• http://translation.langenberg.com
• http://freetranslation.com/web.thm

Url Scripting:



Url scripting is the easiest method. It works on a select few web filters and is based on the same principal as the translation trick. By typing and address like “www.yahoo.com@www.restricted_site.com the filter will not go into effect as it recognizes the trusted site (in this case yahoo.com)

Other tricks:
Simply open the command prompt and type:
Ping restricted.com ? restricted.com obviously being the restricted site
At this point you can take down the IP address (ex. 216.109.124.73) and enter it into the browser. If access to the command prompt is also restricted, see “How to bypass restrictions to get to the command prompt.” If this article has been taken from information leak, then know that it involves anything from opening the browser, selecting view > source, then saving it as X.bat and opening it to opening a folder or browser and typing in the location of cmd.exe depending on the OS. I will not go into further, as this a completely different topic.

Use https://restrictedsite.com as referring to it as a secured site may confuse the filter.

Note: These are ancient methods that many new filters defend against, but still may be applicable in your situation. If not, a little history never hurt anyone.

Web based Proxies:
Another one of the easier, yet effective methods include web based proxies. These are simple in the fact that you just enter the restricted address and surf! Some of these have some restrictions, like daily usage limits, etc but you can also use another proxy (perhaps one that sucks, like a text only) to bypass their restrictions as well. Here is a list of some:

• http://proxify.com]http://proxify.com
• http://www.anonymizer.com/index.cgi]http://www.anonymizer.com/index.cgi
• http://www.guardster.com/]http://www.guardster.com/
• http://anonymouse.ws/anonwww.html]http://anonymouse.ws/anonwww.html
• http://www.the-cloak.com/login.html]http://www.the-cloak.com/login.html
• https://www.megaproxy.com/freesurf]https://www.megaproxy.com/freesurf
• http://www.anonymizer.ru]http://www.anonymizer.ru
• https://nadaily.com/cgi-bin/nph-proxyb.cgi]https://nadaily.com/cgi-bin/nph-proxyb.cgi
• http://www.userbeam.de/cgi-bin/nph-userbeam.cgi]http://www.userbeam.de/cgi-bin/nph-userbeam.cgi
• http://www.free2.surffreedom.com/nph-free.cgi]http://www.free2.surffreedom.com/nph-free.cgi

Proxy Programs:
There are many proxy programs that allow you to surf anonymously that are more or less based on the same topics we’ve covered here. I’ve added them just to cover the topic thoroughly:

• http://www.hotscripts.com/Detailed/28480.html]http://www.hotscripts.com/Detailed/28480.html
• http://www.inetprivacy.com/a4proxy/anonymous-grc.htm]http://www.inetprivacy.com/a4proxy/anonymous-grc.htm
• http://www.orangatango.com/home/index.ie.html]http://www.orangatango.com/home/index.ie.html
• http://www.steganos.com]http://www.steganos.com
• http://www.anonymization.net]http://www.anonymization.net ? toolbar that requires admin rights to install

Making your own CGI proxy server:

Making your own proxy server may come in handy, but I personally find that simply uploading a txt file/w a list of proxies to a free host makes for a much easier and headache free solution. If you don’t know PERL, there is code out there to help you set it up. Check out these sites for more info:

• http://httpbridge.sourceforge.net]http://httpbridge.sourceforge.net
• http://www.jmarshall.com/tools/cgiproxy]http://www.jmarshall.com/tools/cgiproxy
• http://www.manageability.org/blog/stuff/open-source-personal-proxy-servers-written-in-java/view]http://www.manageability.org/blog/stuff/op...en-in-java/view



Admin Access:
When all else fails, you can simply take over the PC and alter or delete the damn filter. This method varies according to the OS (operating system) you are dealing with. Please see “Hacking Windows NT” for more information. If this tutorial has been taken from information leak, then I will go as far as to say it involves booting the PC in another OS, copying the SAM file and cracking it using a program like saminside or LC5 rather than start a whole new topic within one.

Read more »

How to Bypass BIOS Passwords

 How to Bypass BIOS Passwords

BIOS passwords can add an extra layer of security for desktop and laptop computers. They are used to either prevent a user from changing the BIOS settings or to prevent the PC from booting without a password. Unfortunately, BIOS passwords can also be a liability if a user forgets their password, or changes the password to intentionally lock out the corporate IT department. Sending the unit back to the manufacturer to have the BIOS reset can be expensive and is usually not covered in the warranty. Never fear, all is not lost. There are a few known backdoors and other tricks of the trade that can be used to bypass or reset the BIOS

DISCLAIMER
This article is intended for IT Professionals and systems administrators with experience servicing computer hardware. It is not intended for home users, hackers, or computer thieves attempting to crack the password on a stolen PC. Please do not attempt any of these procedures if you are unfamiliar with computer hardware, and please use this information responsibly. LabMice.net is not responsible for the use or misuse of this material, including loss of data, damage to hardware, or personal injury.


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot (or will not) help you, there are a number of methods that can be used to bypass or reset the BIOS password yourself. They include:

Using a manufacturers backdoor password to access the BIOS

Use password cracking software

Reset the CMOS using the jumpers or solder beads.

Removing the CMOS battery for at least 10 minutes

Overloading the keyboard buffer

Using a professional service

Please remember that most BIOS passwords do not protect the hard drive, so if you need to recover the data, simply remove the hard drive and install it in an identical system, or configure it as a slave drive in an existing system. The exception to this are laptops, especially IBM Thinkpads, which silently lock the hard drive if the supervisor password is enabled. If the supervisor password is reset without resetting the and hard drive as well, you will be unable to access the data on the drive.


--------------------------------------------------------------------------------

Backdoor passwords

Many BIOS manufacturers have provided backdoor passwords that can be used to access the BIOS setup in the event you have lost your password. These passwords are case sensitive, so you may wish to try a variety of combinations. Keep in mind that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards. Laptops typically have better BIOS security than desktop systems, and we are not aware of any backdoor passwords that will work with name brand laptops.

WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords

Award BIOS backdoor passwords:

ALFAROME ALLy aLLy aLLY ALLY aPAf _award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC 01322222
589589 589721 595595 598598

AMI BIOS backdoor passwords:

AMI AAAMMMIII BIOS PASSWORD HEWITT RAND AMI?SW AMI_SW LKWPETER A.M.I. CONDO

PHOENIX BIOS backdoor passwords:

phoenix, PHOENIX, CMOS, BIOS

MISC. COMMON PASSWORDS

ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj

OTHER BIOS PASSWORDS BY MANUFACTURER

Manufacturer Password
VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba

TOSHIBA BIOS

Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot

IBM APTIVA BIOS

Press both mouse buttons repeatedly during the boot


--------------------------------------------------------------------------------

Password cracking software

The following software can be used to either crack or reset the BIOS on many chipsets. If your PC is locked with a BIOS administrator password that will not allow access to the floppy drive, these utilities may not work. Also, since these utilities do not come from the manufacturer, use them cautiously and at your own risk.

Cmos password recovery tools 3.1
!BIOS (get the how-to article)
RemPass
KILLCMOS

--------------------------------------------------------------------------------

Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings

Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.
Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.


--------------------------------------------------------------------------------

Removing the CMOS Battery

The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.
Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.


--------------------------------------------------------------------------------

Overloading the KeyBoard Buffer

On some older computer systems, you can force the CMOS to enter its setup screen on boot by overloading the keyboard buffer. This can be done by booting with the keyboard or mouse unattached to the systems, or on some systems by hitting the ESC key over 100 times in rapid succession.


--------------------------------------------------------------------------------

Jumping the Solder Beads on the CMOS

It is also possible to reset the CMOS by connecting or "jumping" specific solder beads on the chipset. There are too many chipsets to do a breakdown of which points to jump on individual chipsets, and the location of these solder beads can vary by manufacturer, so please check your computer and motherboard documentation for details. This technique is not recommended for the inexperienced and should be only be used as a "last ditch" effort.


--------------------------------------------------------------------------------

Using a professional service

If the manufacturer of the laptop or desktop PC can't or won't reset the BIOS password, you still have the option of using a professional service. Password Crackers, Inc., offers a variety of services for desktop and laptop computers for between $100 and $400. For most of these services, you'll need to provide some type of legitimate proof of ownership. This may be difficult if you've acquired the computer second hand or from an online auction.

Read more »

How to build a black box?

How to build a black box?

 I found this tutorial quite a long time ago and I don't know if it still works. Nevertheless , it might be interresting to read, you might even learn something from it! I would have gladly given credit to it's author but won't since I have no idea who he is. So here is his tutorial that remained unchanged ( I hope!):

A BLACK BOX
is a device that is hooked up to your phone that fixes your phone so that when you get a call, the caller doesn't get charged for the call. This is good for calls up to 1/2 hour, after 1/2 hour the phone Co. gets suspicious, and then you can guess what happens.

What this little beauty does is keep the line voltage from dropping to 10v when you answer your fone. The line is instead kept at 36v and it will make the fone think that it is still ringing while your talking. The reason for the 1/2 hour time limit is that the
phone CO. thinks that something is wrong after 1/2 an hour of ringing.

All parts are available at Radio Shack. Using the least possible parts and arangement, the cost is $0.98 !!!! And that is parts for two of them! Talk about a deal! If you want to splurge then you can get a small PC board, and a switch. There are two
schematics for this box, one is for most normal fones. The second one is
for fones that don't work with the first. It was made for use with a Bell
Trimline touch tone fone.

** Schematic 1 for most fones **
** LED ON: BOX ON **

FROM >--------------------GREEN-> TO
LINE >--! 1.8k LED !---RED--> FONE
!--///--!>--!
! !
------>/<-------
SPST



Parts: 1 1.8k 1/2 watt resistor
1 1.5v LED
1 SPST switch

You may just have two wires which you connect together for the switch.


** Schematic 2 for all fones **
** LED ON: BOX OFF **

FROM >---------------GREEN-> TO
LINE >------- ---RED--> FONE
! LED !
-->/<--!>--
! !
---///---
1.8k
�Parts: 1 2 watt resistor
1 1.5v LED
1 DPST switch


Here is the PC board layout that I recommend using. It is neat and is very easy to hook up.

Schematic #1 Schematic #2

************** ****************
* * * ------- *
* --<LED>--- * * ! ! *
* ! ! * * ! <SWITCH> *
* RESISTOR ! * * ! ! ! *
* ! ! * * ! ! / *
* -------- ! * * ! ! *
* ! ! * * ! <LED>! / *
* --SWITCH-- * * ! ! *
* ! ! * * ! ! / *
L * ! ! * F L * ! ! ! * F
I>RED- -RED>O I>RED- ---RED>O
N>-----GREEN---->N N>-----GREEN------>N
E * h * E E * * E
************** ****************

Once you have hooked up all the parts, you must figure out what set of wires go to the line and which go to the fone. This is because of the fact that LED's must be put in, in a certain direction. Depending on which way you put the LED is what controls what wires are for the line & fone.

How to find out:

Hook up the box in one direction using one set offor line and the other for fone.

*NOTE* For Model I switch should be OFF.
*NOTE* For Model ][ switch should be set to side connecting the led.

Once you have hooked it up, then pick up the fone and see if the LED is on. If it is, the LED will be lit. If is doesn't light then switch the wires and try again. Once you know which are which then label them. *NOTE* - If neither directions worked then your
�lable the switch in its current position as BOX ON.

How to use it:

The purpose of this box is for poeple who call you not to pay so it would make
sence that it can only be used to receive! calls. When the box is *ON* then you may only recieve calls. Your fone will ring like normal and the LED on the box will flash. If you answer the fone now, then the LED will light and the caller will not be charged. Hang up the fone after you are done talking like normal. You will not be able to get a dial-tone or call when the box is on, so turn the box *OFF* for normal calls. I don't recommend that you leave it on all the time, as you don't want it to answer when Ma Bell calls!

Hope it brought something to those who read it.

XIII
numberXIII@Phreaker.net

Read more »

How To Boot Xp Faster (updated)

First of all, this tweak only apply to those who only have one HDD on their primary IDE channel (nothing else on device 0 or 1) and a CD-ROM and/or DVD-ROM on the secondary IDE channel. Each time you boot Windows XP, there's an updated file called NTOSBOOT-*.pf who appears in your prefetch directory (%SystemRoot%Prefetch) and there's no need to erease any other files as the new prefetch option in XP really improves loading time of installed programs. We only want WindowsXP to boot faster and not decrease its performance. Thanks to Rod Cahoon (for the prefetch automation process...with a minor change of mine) and Zeb for the IDE Channel tweak as those two tricks, coupled together with a little modification, result in an EXTREMELY fast bootup:

1. Open notepad.exe, type "del c:windowsprefetch tosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device 0 or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

WindowsXP should now boot REALLY faster.

Read more »

How To Block Websties Without Software, block websites

How To Block Websties Without Software, block websites

 Steps:

1] Browse C:\WINDOWS\system32\drivers\etc
2] Find the file named "HOSTS"
3] Open it in notepad
4] Under "127.0.0.1 localhost" Add 127.0.0.2 www.sitenameyouwantblocked.com , and that site will no longer be accessable.
5] Done!

-So-

127.0.0.1 localhost
127.0.0.2 www.blockedsite.com

-->www.blockedsite.com is now unaccessable<--


For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.

IE: 127.0.0.3 www.blablabla.com
127.0.0.4 www.blablabla.com
127.0.0.5 www.blablabla.com

etc

Read more »

HOW TO BLOCK PEOPLE ON WINMX WHO SHARE NOTHING

Some people seem to think our network is a kind of a store a they just pick what they want without sharing anything!
(and other considere our net as a schoolyard where one "trade"... Childish!)

*********************

You can help everybody getting rid of them by boycotting them that way:

You "browse" each uploading user.


** If he/she shares more than, say, a hundred files (and NOT in the WinMx directory only, putting them elsewhere and unshared when entirely downloaded !!!), OK.
NB: a hundred is not a lot but 1- we don't all have a large HDD and some files are big 2- when you begin...!                                                                             
** If not:

You can send a message to him/her to ask why there is no real share, or not at all, for they can have forgotten to do so: give them a chance! The first time, I didn't understand that I had to choose the shared files types, so I shared nothing, unwillingly. Somebody told it to me in a message.

If no answer and/or still no shared file, you can exclude the selfish beast:
(Thanks to dwhite who gave the modus operandi on the WinMx net)

To block somebody from downloading, add the name to your HOTLIST (right-click the name then "Add to hotlist") then to your IGNORE list.

You won't receive any messages nor will they enter your queue, during that session at least.

********************

On the contrary, you can help people who share a lot by starting the tranfer when they are in your queue, or give a higher bandwith priority...

Read more »

How To Backup Ps2 Games

 Hi guys...here I found a tutorial of another Foum:
INFO: Text didn't write by me!


Okay, these are some methods to backup PS2 titles and Xbox titles, in order to play a backup you need a modchip of some sort, I have also included a tutorial on boot methods. Follow any one of these instructions to fit your needs. You can tell what format the PS2 title is by looking at the written side of the disc, DVD's are Silver and CD's are Purple. The DVD backup methods here consist of reading the image to the hard drive then burning it to the media for an easier backup, this depends on your hardware and it?s setup. I say that because the proper setup would be to have the Reader and Writer on separate IDE cables. This allows no cross information when doing Disc to Disc/On the fly copying. But, since most people would not know how to check or fix this, I suggest reading the image to your Hard Drive and then burning from there. *A little useful trick*, If the DVD backup "image" is small enough in size you can fit it onto a CD-R (80 minute or larger if need be) instead of using a more expensive DVD-R. I have done this succesfully using Prassi and the first tutorial for it below. In addition a DVD Movie backup will play on a PS2/Xbox without a chip. As I get more info I will update. Dexter


PS1/PS2 CD backup tutorials


Using CloneCD (v4.x.xx) for PS1/PS2

1. Start CloneCD
2. Select "Copy CD"
3. Select your Reader, press Next
4. Select "Game CD", press Next
5. Select/Deselect your options here (on the fly, cue or delete) then press Next
6. Select your Writer, press Next
7. Select your burn speed and "Game CD"
8. Press "OK" to begin


Using Alcohol 120% for PS1/PS2

1. Start Alcohol 120%
2. Select ?Copy Wizard?
3. Select your Reader & Read Speed
4. Select or Deselect ?Copy current disc on the fly?
5. For Datatype select which console PS1 or PS2, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anything else you feel you might need
8. Make sure the Datatype selected is the same you chose above
9. Press Start to begin


PS2 DVD backup tutorials


Using Prassi

1. Start Primo
2. Select "go to full application"
3. Right Click the drive that has your original in it
4. Select "build global image" and choose a path for the image (preferably on an NTFS opsys)
5. After the image is extracted go to next step
6. Choose the 3rd disc icon from the left *or* click file, new job, Global/Other Image
7. Then just burn the .gi (global image) of the game


This next way has one less step which saves some time because once you press record it does everything by itself (if you have a DVD reader and DVD Writer)

1. Start Primo
2. Use the "PrimoDVD Starter" (it's easier, and less confusing)
3. Choose "disc copy"
4. Select your Reader and Also your Writer
5. Select "make a temp image on HD..."
6. Select your burn speed and then record to begin


Using Nero

1. Start Nero, Use the Wizard (for easy use)
2. Select "DVD" then select Next
3. Select "Copy a DVD" then select Next
4. Select your source drive
5. Check OFF "copy on the fly" then select next
6. Select your write speed
7. Select either "Test", "Test and Burn" or "Burn"
8. Press "Burn" to begin

This next way is without the Wizard

1. Start Nero, and select "File" then "New..."
2. On upper left side of the window from the drop down menu select "DVD"
3. Select "DVD Copy" Icon
4. Select "Copy options" tab
5. Check OFF "copy on the fly"
6. Select source drive and read speed
7. If needed Select "Image" tab to choose image directory and select/deselect "delete image..."
8. Select "Burn" tab and choose your settings
9. Press "Copy" to begin


Using Alcohol 120%

1. Start Alcohol 120%
2. Select ?Copy Wizard?
3. Select your Reader
4. For ?Separate Image file every:? choose ?Never Separate?
5. Select or Deselect ?Copy current disc on the fly?, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anything else you feel you might need
8. Select or Deselect ?Delete image file after recording?
9. Press Start to begin


XBOX backup tutorials


Xbox original games are burned from the outside in. The only way to backup a title is to have a modchip like X-exuter (best), Enigma, or Xodus/Matrix. You also have to flash the bios and have a CD program inserted or installed into the X-Box named EVO-X (this allows you to assign the X-Box an IP address). The game has to be stored on the X-Box's HD, this allows you to file transfer the title to your PC using an ftp program like FlaxhFXP (best) or similar. From there you use a burning application to make the backup. Some applications allows you to "drag & drop" right from the Xbox or you can build an ISO of the image then burn to CD-R/W or DVD-R/W backup. (I will update this to show steps as soon as I have a minute)


Modded PS2 with or without Action Replay/GameShark CD & DVD backup booting methods

PS2 with NeoKey/Sbox & AR/GS, PS1 CD backup booting

1. Turn on PS2 and NeoKey/Sbox
2. Press Eject
3. Insert PS1 CD backup
4. Press reset
5. PS2 tray will close
6. PS1 CD backup will now boot


PS2 with NeoKey/Sbox & AR/GS, PS2 CD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc
4. At the AR/GS menu, select Start Game, With/Without codes
5. Eject and swap to your PS2 CD backup and press X.
6. Screen will change and game will now boot

* Note - Neokey will not play DVD-R!
* Note - Old versions of AR2/GS2 you might need to press R1+O instead of X to boot games


PS2 with Neo 2.2, PS1 CD backup booting

1. Turn on PS2
2. Press Eject
3. Insert PS1 CD backup
4. Press reset
5. PS2 tray will close
6. PS1 CD backup will now boot


PS2 with Neo 2.2 & AR/GS, PS2 CD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc
4. At the AR/GS menu, select Start Game, With/Without codes
5. Eject and swap to your PS2 CD backup and press X.
6. Screen will change and game will now boot


PS2 with Neo 2.2 & AR/GS, PS2 DVD backup booting

1. Have AR/GS dongle in a memory card slot
2. Power on your PS2
3. Insert AR/GS disc, close tray
4. Power off your PS2, wait a few seconds
5. Press and Hold Reset button to load AR/GS
6. At the AR2/GS2 menu, press EJECT while still holding Reset
7. Swap AR/GS disc for an Original-TOC-DVD* and wait 10 seconds
8. Select "AR/GS Codes"
9. Highlight "Add new code" and press X to get to the next screen
10. Press X three times. You will see "Updating code list please wait" each time)
11. Press "Start" on controller
12. Select "Without codes", press X
13. Then Press X again, and immediately release the Reset button, you will see "Updating code list please wait"
14. The PS2 tray will eject allowing you to swap Original-TOC-DVD* for DVD backup and then close on it?s own
15. Screen will change and game will now boot

* Note - "Original-TOC-DVD" is an original DVD that is a larger file size than the backup
* Note ? For a shortcut make a few ?Add new codes? and after step 8 just highlight one of them and press square to delete it, then proceed on with step 11

PS2 with Messiah

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.


PS2 with Magic 2, 3 or 3.5

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.


Ps2 with Apple Mod

1. PSX Backups will boot directly.
2. PS2 CD-R Backups will boot directly.
3. PS2 Unpatched EA backups will boot directly.
4. PS2 DVD-R Backups will boot directly.[CODE]

Read more »

How to Export Registry Keys

 Before you edit the registry, export the keys in the registry that you plan to edit, or back up the whole registry. If a problem occurs, you can then follow the steps how-to restore the registry to its previous state.


How to Export Registry Keys

Click Start, and then click Run.

In the Open box, type regedit, and then click OK.

On the File menu, click Export.

In the Save in box, select the boxs at the bottom the bottom according to weather you want to export all or only selected branches of the registry.

Next select a location in which to save the backup .reg file. In the File name box, type a file name, and then click Save.


How to Restore the Registry

To restore registry keys that you exported, double-click the .reg file that you saved.



are you sick of seeing the same tips again and again when you first logon to Windows? Now you can change them to whatever you want, whether it's quotes, jokes or a to-do list, anything is possible.

Open your registry and find the key below.

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Explorer\ Tips

Create a new string valued named by incrementing the existing value names and set it to the required tip text.

eg. 32 - Dont forget to Visit

Read more »

How to Add an Option to Print the Contents of a Folder

How to Add an Option to Print the Contents of a Folder

Would you like to be able to right click any folder in Explorer and print its contents? You can add this option to the context menu by following these steps:

First, you need to create a batch file called Printdir.bat. Open Notepad or another text editor and type (or cut and paste) this text:

@echo off
dir %1 /-p /o:gn > "%temp%\Listing"
start /w notepad /p "%temp%\Listing"
del "%temp%\Listing"
exit

Now, in the Save As dialog box, type "%windir%\Printdir.bat" (without the quotation marks) and click the Save button.
Click Start, Control Panel, Folder Options.
Click the File Types tab, and then click File Folder.
Click the Advanced button.
Click the New button.

In the Action box, type "Print Directory Listing" (without the quotation marks).

In the Application used to perform action box, type "Printdir.bat" (without the quotation marks).

Click OK in all three dialog boxes to close the dialog boxes.

You're not quite finished yet! Now you need to edit the Registry, so open your favorite Registry Editor.

Navigate to HKEY CLASSES ROOT\Directory\shell.

Right click on "default" and select Modify.
In the File Data box, type "none" (without the quotation marks).

Click OK and close the Registry Editor.

Now when you right click a folder, you'll see the option to Print Directory Listing. Selecting it will print the contents of the folder.

Who needs a stinking program to print a folder directory?

Read more »

How To Access Your Folders From Your Taskbar

How To Access Your Folders From Your Taskbar

This is an easy way to get to the folders on your system without having to open a Windows Explorer Window every time you want to access files. I find it very useful to have this feature as it allows me to access my Folders and Drives immediately and saves me a lot of time.

This works in Windows XP:

1. Right Click an empty spot on your Taskbar (Between your Start Button and your System Tray).
2. Click Toolbars.
3. Click New Toolbar.
4. A Small Window will Open that allows you to pick the folder you wish to make a Toolbar. If you want to access your Desktop Without having to minimize all your windows. Just Pick Desktop. If you want to access ONLY your My Documents Folder, Select that. Any folder will work for this.
5. Click OK.
The New Tool bar will appear at the bottom of your screen next to your System Tray.

If you find this to be not useful, Repeat Steps 1 and 2 and then check click the Toolbar you created that has a check mark next to it. And it will disappear.

Read more »

How Long Has Your System Been Running?

 How Long Has Your System Been Running?

Here's how you verify system uptime:

Click Start | Run and type cmd to open a command prompt.
At the prompt, type systeminfo

Scroll down the list of information to the line that says System Up Time.

This will tell you in days, hours, minutes and seconds how long the system has been up.

Note that this command only works in XP Pro, not in XP Home. You can, however, type net statistics workstation at the prompt in Home. The first line will tell you the day and time that the system came online.

Read more »

CMD Important Commands

 add the open cmd prompt to folder context menus
also drives and My Computer

copy what's in the code area to notepad and save as cmd here.reg

CODE

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\Drive\shell\cmd]
@="Command Prompt"

[HKEY_CLASSES_ROOT\Drive\shell\cmd\command]
@="cmd.exe /k \"cd %L\""

[HKEY_CLASSES_ROOT\Directory\shell\cmd]
@="Command Prompt"

[HKEY_CLASSES_ROOT\Directory\shell\cmd\command]
@="cmd.exe /k \"cd %L\""

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\cmd]
@="Command Prompt"

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\cmd\command]
@="cmd.exe /k \"cd %L\""

Read more »

Graffiti On Walls 4 Adobe Photoshop Cs 8.0

Graffiti On Walls 4 Adobe Photoshop Cs 8.0

Graffiti On Wall Tutorial For
Photoshop Cs 8.0

For This Tutorial You Must Have A Basic Understanding Of Adobe Photoshop Cs 8.0, Example : Where The Features Of The Program Are.
CODE

For This Tutorial You Will Need The Font Called Political Graffiti FIll Which Can Be Aquired Here:
http://www.dafont.com/en/font.php?file=political_graft

And

The Starting Wall Picture Which Can be Aquired Here:
http://www.imagehosting.us/imagehosting/showimg.jpg/?id=59054





(1). Open Photoshop Cs 8.0

(2). Open Wall Picture

(3). Type Ur Second Name In Red At 210pt Font Size In The Political Graffiti Fill Font.

(4). Click Icon All The Way At The Topright That Looks Like A T With A Rounded Line Under It. (Warp Text)

(5). Distort Style Squeeze Vertical, Bend = -31%, Horizontal Distortion = +18%, Vertical Distortion = +34%

(6). Layer> Layer Style> Blending Options, General Blending> Opacity 79%> Fill Opacity 100%, Blend If: Gray, Underlying Layer Black 60, White 210

(7). Type Ur First Name In Red At 210pt Font Size In The Political Graffiti Fill Font.

(8). Click Icon All The Way At The Topright That Looks Like A T With A Rounded Line Under It. (Warp Text)

(9). Distort Style Squeeze Vertical, Bend = +50%, Horizontal Distortion = 0%, Vertical Distortion = -31%

(10). Layer> Layer Style> Blending Options, General Blending> Opacity 79%> Fill Opacity 100%, Blend If: Gray, Underlying Layer Black 60, White 210

(11). Duplicate Both Layers

(12). Move Copied Layers One On Top Of The Other (In The Layer Menu)

(13). Hide The Original Ur Second Name And Ur First Name Layers By Clicking The Eye Icons So That They Dissapear.

(14). In The Copies, Right Click (One At A Time) And Click Rasterize Layer.

(15). Go to Layer> Merge Down (Ctrl + E) (On Top Name Layer).

(16). Layer> Layer Style> Stroke Change Color To Black, Size to 8, Then Opacity To 68%.

(17). Save If No Blur Effect Wanted

(18). Filter> Blur> Smart Blur> Mode: Overlay Edges, Threshhold 48%, Radius 6, Quality: High.

(19). Layer> New Layer

(20) Brush Tool (B), Paint Brush With The Soft 16pt Airbrush For Spraypaint Effect.

(21). Smuge Around Graffiti For Paint Smudge Look For Good Effect (Optional)

(22). Save.


Finito

Final Images:

CODE
Graffiti With Blur:
http://www.imagehosting.us/imagehosting/showimg.jpg/?id=59056

Graffiti No Blur:
http://www.imagehosting.us/imagehosting/showimg.jpg/?id=59057

Read more »